ROD END SUPPLY PARTS & PRICE LIST for ROD ENDS PROVIDED BY ROADRACEPARTS.COM

Call Us with any Questions or more information: 804 - 921 - 0902

LUBRICATION REQUIRED
To insure proper function, the rod ends listed below must be lubricated. To insure complete lubrication, before installation, rotate ball bore 90 to installed position, fill housing with high-quality grease. Restore ball bore to installed position, wipe off excess grease and install.
CAUTION
Lubricants may attract dirt and other abrasive contamination. Rod ends must be removed, thoroughly cleaned, inspected, and re-greased whenever contamination of any kind is present.
DO NOT OPERATE VEHICLE WITH WORN OR CONTAMINATED ROD ENDS

DO NOT INSTALL ANY COMPONENT LISTED ABOVE BEFORE READING, UNDERSTANDING AND ACCEPTING THE WARNINGS PRINTED ON PAGE 1 OF OUR CATALOG, AND PACKAGED WITH EACH PRODUCT

EM, EF   ECONOMY SERIES & STEERING ROD ENDS

NOTES: 1. F OR LEFT HAND THREADS ADD “L” TO PREFIX. EXAMPLE: EML12; 2. F OR STUDS ADD “Y” TO SUFFIX. EXAMPLE: EM6Y

ULT.

BORE

B

DIA.

W

T

N

CM

CF

a°

STATIC

RES

X THD.

DIA.

WIDTH

WIDTH

BALL

AM

AF

THD.

LGTH.

LGTH.

E

F

MIS.

RADIAL

APPROX.

PART

SIZE

0.0025

DIA.

LGTH.

LGTH.

UNF.

0.062

0.062

DIA.

FLAT

ANG.

LOAD

WEIGHT

Racer

NO.

REF.

-0.0005

± .010

± .005

REF

REF.

± .015

± .015

3A-2B

-0.031

-0.031

± .010

± .010

REF.

(LBS.)

(LBS

Price

EM 3

3/16 x 10-32

0.19

0.625

0.312

0.234

0.437

1.25

-

10-32

0.75

-

-- -

-

20

2,074

0.03

$2.37

EF 3

3/16 x 10-32

0.19

0.625

0.312

0.234

0.437

-

1.062

10-32

-

0.500

0.406

0.312

20

2,079

0.04

$2.37

EM 4

1/4 x 1/4-28

0.25

0.75

0.375

0.25

0.5

1.562

-

1/4-28

1.00

-

-

-

27

3,820

0.04

$2.39

EF 4

1/4 x 1/4-28

0.25

0.75

0.375

0.25

0.5

-

1.312

1/4-28

-

0.687

0.469

0.375

27

3,820

0.05

$2.39

EM 5

5/16 x 5/16-24

0.3125

0.875

0.437

0.312

0.625

1.875

-

5/16-24

1.25

-

-

-

22

5,110

0.07

$2.43

EF 5

5/16 x 5/16-24

0.3125

0.875

0.437

0.312

0.625

-

1.375

5/16-24

-

0.687

0.500

0.437

22

5,110

0.08

$2.43

EM 6

3/8 x 3/8-24

0.375

1

0.5

0.359

0.719

1.938

-

3/8-24

1.25

-

-

-

22

7,605

0.11

$2.74

EF 6

3/8 x 3/8-24

0.375

1

0.5

0.359

0.719

-

1.625

3/8-24

-

0.812

0.687

0.562

22

7,605

0.13

$2.74

EM 7

7/16 x 7/16-20

0.4375

1.125

0.562

0.406

0.812

2.125

-

7/16-20

1.375

-

-

-

21

9,122

0.15

$3.59

EF 7

7/16 x 7/16-20

0.4375

1.125

0.562

0.406

0.812

-

1.812

7/16-20

-

0.937

0.750

0.625

21

9,122

0.18

$3.59

EM 8

1/2 x 1/2-20

0.5

1.312

0.625

0.453

0.937

2.438

-

1/2-20

1.50

-

-

-

20

12,224

0.24

$4.29

EF 8

1/2 x 1/2-20

0.5

1.312

0.625

0.453

0.937

-

2.125

1/2-20

-

1.062

0.875

0.750

20

12,224

0.29

$4.29

EM10

5/8 x 5/8-18

0.625

1.5

0.75

0.484

1.125

2.625

-

5/8-18

1.625

-

-

-

26

13,540

0.36

$6.44

EF 10

5/8 x 5/8-18

0.625

1.5

0.75

0.484

1.125

-

2.5

5/8-18

-

1.375

1

0.875

26

13,540

0.43

$6.44

EM 12

3/4 x 3/4-16

0.75

1.75

0.875

0.593

1.312

2.785

-

3/4-16

1.75

-

-

-

24

18,810

0.57

$8.57

EF 12

3/4 x 3/4-16

0.75

1.75

0.875

0.593

1.312

-

2.875

3/4-16

-

1.562

1.125

1.000

24

18,810

0.65

$8.57

Heavy Duty

Shank

EM 3-4

3/16 x 1/4-28

0.19

0.75

0.312

0.234

0.437

1.562

--

1/4-28

1.00

--

--

--

20

4,824

0.04

EM 4-5

1/4 x 5/16-24

0.25

0.875

0.375

0.25

0.5

1.875

--

5/16-24

1.25

--

--

--

27

6,534

0.06

$3.40

EM 5-6

5/16 x 3/8-24

0.3125

1

0.437

0.312

0.625

1.938

--

3/8-24

1.25

--

-

-

22

7,920

0.1

$2.87

EM 6-7

3/8 x 7/16-20

0.375

1.125

0.5

0.359

0.719

2.125

--

7/16-20

1.375

--

--

--

22

9,486

0.14

$4.18

EM 6-8

3/8 x 1/2-20

0.375

1.125

0.5

0.359

0.719

2.125

--

1/2-20

1.375

--

--

--

22

9,486

0.17

$4.65

EM 7-8

7/16 x 1/2-20

0.4375

1.312

0.562

0.406

0.812

2.438

--

1/2-20

1.50

--

--

--

21

12,816

0.22

$4.65

EM 8-10

1/2 x 5/8-18

0.5

1.5

0.625

0.453

0.937

2.625

--

5/8-18

1.625

--

--

--

26

15,804

0.34

$6.44

EM 8-12

1/2 x 3/4-16

0.5

1.5

0.75

0.484

1.125

2.625

--

3/4-16

1.625

--

--

--

24

15,804

0.42

$8.20

EM 10-12

5/8 x 3/4-16

0.625

1.75

0.75

0.484

1.125

2.875

--

3/4-16

1.75

--

--

--

24

19,350

0.51

$8.57

Steering

Rod Ends

EM10Z-102

5/8 x 5/8

0.625

1.75

0.875

0.593

1.312

2.625

--

5/8-18

1.75

--

--

--

24

15,000

0.48

$9.00

EMR12-.757

.757 x 3/4

0.757

1.75

0.875

0.593

1.312

2.875

--

3/4-16

1.75

--

--

--

24

18,810

0.57

$9.50

BBEM  High Strength Alloy 2 Piece

NOTES: 1. F OR LEFT HAND THREADS ADD “L” TO PREFIX. EXAMPLE: BBEML12;  2. F OR STUDS ADD “Y” TO SUFFIX. EXAMPLE: BBEM12Y;  3. F OR TEFLON LINER ADD “T” TO SUFFIX. EXAMPLE: BBEM12T.

ULT.

BORE

B

D

W

T

N

CM

a°

STATIC

RES

X THD.

DIA.

DIA.

WIDTH

WIDTH

BALL

AM

THD.

LGTH.

E

MIS.

RADIAL

APPROX.

PART

SIZE

0.0025

DIA.

LGTH.

UNF.

0.062

DIA.

ANG.

LOAD

WEIGHT

Racer

NO.

REF.

-0.0005

± .010

± .005

REF

REF.

± .015

3A-2B

-0.031

± .010

REF.

(LBS.)

(LBS

Price

BBEM 5

5/16 x 5/16-24

0.3125

0.875

0.437

0.312

0.625

1.875

5/16/2024

1.25

-

22

7100

0.07

$3.95

BBEM 6

3/8 x 3/8-24

0.375

1

0.5

0.359

0.719

1.938

3/8/2024

1.25

-

22

10,500

0.11

$4.44

BBEM 7

7/16 x 7/16-20

0.4375

1.125

0.562

0.406

0.812

2.125

7/16/2020

1.375

-

21

12,650

0.15

$5.80

BBEM 8

1/2 x 1/2-20

0.5

1.312

0.625

0.453

0.937

2.438

1/2/2020

1.5

-

20

17,000

0.24

$6.55

BBEM 10

5/8 x 5/8-18

0.625

1.5

0.75

0.484

1.125

2.625

5/8/2018

1.625

-

26

18,000

0.36

$8.72

BBEM 12

3/4 x 3/4-16

0.75

1.75

0.875

0.593

1.312

2.875

3/4/2016

1.75

-

24

25,000

0.57

$11.63

Heavy Duty

Shank

BBEM 8-10

1/2 x 5/8-18

0.5

1.5

0.625

0.453

0.937

2.625

5/8/2018

1.625

-

26

19,300

0.3

$8.72

BBEM 10-12

5/8 x 3/4-16

0.625

1.75

0.75

0.484

1.125

2.875

3/4/2016

1.75

-

24

27,000

0.48

$11.63

PM, PF Mild Steel PM, PF PRECISION - WEAR RESISTANT MALE ROD-END LOAD RATINGS BASED ON NO LUBRICATION FITTING

NOTES: 1. F OR LEFT HAND THREADS ADD “L” TO PREFIX. EXAMPLE: PML4 3. F OR TEFLON LINER ADD “T” TO SUFFIX. EXAMPLE: PM12T; 2. F OR STUDS ADD “Y” TO SUFFIX. EXAMPLE: PM6Y
 

BORE

B

DIA.

W

T

N

CM

CF

a°

STATIC

RES

X THD.

DIA.

WIDTH

WIDTH

BALL

AM

AF

THD.

LGTH.

LGTH.

E

F

MIS.

RADIAL

APPROX.

PART

SIZE

0.0025

DIA.

LGTH.

LGTH.

UNF.

0.062

0.062

DIA.

FLAT

ANG.

LOAD

WEIGHT

Racer

NO.

REF.

-0.0005

± .010

± .005

REF

REF.

± .015

± .015

3A-2B

-0.031

-0.031

± .010

± .010

REF.

(LBS.)

(LBS

Price

PM 3

3/16 x 10-32

0.1900

0.625

0.312

0.250

0.437

1.25

-

10-32

0.750

-

-

-

13

1,169

0.03

4.51

PF 3

3/16 x 10-32

0.1900

0.625

0.312

0.250

0.437

-

1.062

10-32

-

0.562

0.406

0.312

13

1,531

0.04

$4.51

PM 4

1/4 x 1/4-28

0.2500

0.750

0.375

0.281

0.500

1.562

-

1/4-28

1.000

-

-

-

16

2,158

0.04

$4.69

PF 4

1/4 x 1/4-28

0.2500

0.750

0.375

0.281

0.500

-

1.132

1/4-28

-

0.750

0.469

0.375

16

2,539

0.06

$4.69

PM 5

5/16 x 5/16-24

0.3125

0.875

0.437

0.344

0.625

1.875

-

5/16-24

1.250

-

-

-

14

2,784

0.07

$5.56

PF 5

5/16 x 5/16-24

0.3125

0.875

0.437

0.344

0.625

-

1.375

5/16-24

-

0.750

0.500

0.437

14

3,133

0.09

$5.56

PM 6

3/8 x 3/8-24

0.3750

1.000

0.500

0.344

0.719

1.938

-

3/8-24

1.250

-

-

-

12

3,915

0.11

$5.90

PF 6

3/8 x 3/8-24

0.3750

1.000

0.500

0.406

0.719

-

1.625

3/8-24

-

0.937

0.687

0.562

12

3,915

0.15

$5.90

PM 7

7/16 x 7/16-20

0.4375

1.125

0.562

0.406

0.812

2.125

-

7/16-20

1.375

-

-

-

14

4,218

0.16

$7.29

PF 7

7/16 x 7/16-20

0.4375

1.125

0.562

0.437

0.812

-

1.812

7-16-20

-

1.062

0.750

0.625

14

4,218

0.20

$7.29

PM 8

1/2 x 1/2-20

0.5000

1.312

0.625

0.437

0.937

2.438

-

1/2-20

1.500

-

-

-

12

6,660

0.24

$8.59

PF 8

1/2 x 1/2-20

0.5000

1.312

0.625

0.500

0.937

-

2.125

1/2-20

-

1.187

0.875

0.750

12

6,660

0.33

$8.59

PM 10

5/8 x 5/8-18

0.6250

1.500

0.750

0.500

1.125

2.625

-

5/8-18

1.625

-

-

-

16

7,364

0.37

$11.72

PF 10

5/8 x 5/8-18

0.6250

1.500

0.750

0.562

1.125

-

2.5

5/8-18

-

1.500

1.000

0.875

16

7,364

0.48

$11.72

PM 12

3/4 x 3/4-16

0.7500

1.750

0.875

0.562

1.312

2.875

-

3/4-16

1.750

-

-

-

14

11,518

0.60

$22.34

PF 12

3/4 x 3/4-16

0.7500

1.750

0.875

0.687

1.312

-

2.875

3/4-16

-

1.750

1.125

1.000

14

11,518

0.72

$22.34

PM 14

7/8 x 7/18-14

0.8750

2.000

0.875

0.687

1.375

3.375

3.375

7/8-14

2.000

-

-

--

12

18,476

0.92

$29.83

PF 14

7/8 x 7/18-14

0.8750

2.000

0.875

0.765

1.375

-

-

7/8-14

-

1.875

1.300

1.125

77

18,476

1.03

$29.83

PM 16-1

1 x 1-14

1.0000

2.750

1.375

1.000

1.875

4.125

4.125

1-14

2.125

-

-

-

17

43,541

2.13

$40.63

PF 16-1

1 x 1-14

1.0000

2.750

1.375

1.000

1.875

-

-

1-14

-

2.125

1.625

1.500

17

43,541

2.41

$40.63

Heavy Duty

Shank

PM 3-4

1/4 x 5/16-24

0.2500

0.875

0.375

0.281

0.500

1.875

-

5/16-24

1.250

-

-

-

13

3,467

0.07

$4.51

PM 4-5

5/16 x 3/8-24

0.3125

1.000

0.437

0.344

0.625

1.938

-

3/8-24

1.250

-

-

-

12

5,323

0.11

$5.56

PM 5-6

3/8 x 7/16-20

0.3750

1.125

0.500

0.406

0.719

2.125

-

7/16-20

1.375

-

-

-

10

7,180

0.16

$5.90

PM 6-7

7/16 x 1/2-20

0.4375

1.312

0.562

0.437

0.812

2.438

-

1/2-20

1.500

-

-

-

12

9,620

0.25

$7.29

PM 7-8

1/2 x 5/8-18

0.5000

1.500

0.625

0.500

0.937

2.625

-

5/8-18

1.625

-

-

-

10

12,807

0.37

$8.59

PM 8-10

5/8 x 3/4-16

0.6250

1.750

0.750

0.562

1.125

2.785

-

3/4-16

1.750

-

-

-

13

16,565

0.57

$11.72

PM 10-12

3/4 x 7/8-14

0.7500

2.000

0.875

0.687

1.312

3.375

-

7/8-14

1.875

-

-

-

12

22,843

0.92

$22.34

PM 12-14

1 x 1 1/4-12

1.0000

2.750

1.375

1.000

1.875

4.125

-

1 1/4-12

1.125

-

-

-

17

43,541

2.13

$29.83

PM 16

-

$40.63

PMX, PFX Precision Chromoly steel

NOTES: 1. F OR LEFT HAND THREADS ADD “L” TO PREFIX. EXAMPLE: PMXL4 3. F OR TEFLON LINER ADD “T” TO SUFFIX. EXAMPLE: PMX12T; 2. F OR STUDS ADD “Y” TO SUFFIX. EXAMPLE: PMX6Y
 

ULT.

BORE

B

D

W

T

BALL

AM

AF

N

CM

CF

E

F

a °

STATIC

RES

X THD.

DIA.

DIA.

WIDTH

WIDTH

DIA.

LGTH.

LGTH.

THD.

LGTH.

LGTH.

DIA.

FLAT

MIS.

RADIAL

APPROX.

Racer

PART

SIZE

0.0015

± .010

0

UNF.

0.062

0.062

ANG.

LOAD

WEIGHT

Price

NO.

REF.

-0.0005

-0.005

± .005

REF.

± .015

± .015

3A-2B

-0.031

-0.031

± .010

± .010

REF.

(LBS.)

(LBS.)

PMX 3

3/16 x 10-32

0.1900

0.625

0.312

0.250

0.437

1.25

-

10-32

0.75

-

-

-

13

2851

0.03

$8.82

PFX 3

3/16 x 10-32

0.1900

0.625

0.312

0.250

0.437

-

1.062

10-32

-

0.562

0.406

0.312

13

3,733

0.04

$8.82

PMX 4

1/4 x 1/4-28

0.2500

0.750

0.375

0.281

0.500

1.562

-

1/4-28

1.000

-

-

-

16

5,260

0.04

$8.86

PFX 4

1/4 x 1/4-28

0.2500

0.750

0.375

0.281

0.500

-

1.312

1/4-28

-

0.750

0.469

0.375

16

6,190

0.06

$8.86

PMX 5

5/16 x 5/16-24

0.3125

0.875

0.437

0.344

0.625

1.875

-

5/16-24

1.250

-

-

-

14

7,639

0.07

$9.00

PFX 5

5/16 x 5/16-24

0.3125

0.875

0.437

0.344

0.625

-

1.375

5/16-24

-

0.750

0.500

0.437

14

7,639

0.09

$9.00

PMX 6

3/8 x 3/8-24

0.3750

1.000

0.500

0.344

0.719

1.938

-

3/8-24

1.250

-

-

-

12

9,544

0.11

$10.67

PFX 6

3/8 x 3/8-24

0.3750

1.000

0.500

0.406

0.719

-

1.625

3/8-24

-

0.937

0.687

0.562

12

9,544

0.15

$10.67

PMX 7

7/16 x 7/16-20

0.4375

1.125

0.562

0.406

0.812

2.125

-

7/16-20

1.375

-

-

-

14

10,285

0.16

$13.17

PFX 7

7/16 x 7/16-20

0.4375

1.125

0.562

0.437

0.812

-

1.812

7/16-20

-

1.062

0.750

0.625

14

10,285

0.2

$13.17

PMX 8

1/2 x 1/2-20

0.5000

1.312

0.625

0.437

0.937

2.438

-

1/2-20

1.500

-

-

-

12

16,238

0.24